Lamp Shade With Crack Pattern Finish

3D drawing and its requirement like material, quantity and surface finish.

Our MOQ is from 500 to 2000, which depends on the product’s size.

It is always the rule that who pays the injection molds who own them. We are just the manufacturer and keeper on them

The SPI (Society of the Plastics Industry) classifies injection molds based on their life expectancy:

Class 101 – Life expectancy of +1,000,000 cycles. These are the most expensive injection molds.

Class 102 – Life expectancy not to exceed 1,000,000 cycles

Class 103 – Life expectancy under 500,000 cycles

Class 104 – Life expectancy less than 100,000 cycles

Class 105 – Life expectancy less than 500. This classification is for prototype molds and these molds are the least expensive.

We usually provide advice and quotations according to the customer's life expectancy requirements

Most material has its application specific. If you don't have a material selected for your application, we can help and offer some guidance. Often several materials can be sampled but the customer has final approval before proceeding.

If you would like to check our stock plastic injection samples to know our quality, it is free to offer the material/surface finish sample you want by charging only its freight cost.

For the injection molds you pay to make, we will offer free testing samples after mould is finished

We have a strict and full inspection flow by having advanced inspection jigs/machines and one professional QC team. The finished products must pass this flow to get its approval  to be shipped